Less complicated, cheaper and easier to install than any other systems. The single line Resistance System facilitates the supply of small doses of oil by mean of Metering Units. Both electric and manual pumps are available to ensure a discharge of up to 200 cc/minute via range of Metering Units. Oil dosage is proportional to the pump pressure and oil viscosity. Single Line Resistive lubrication systems are low pressure oil lubrication systems for light, medium and heavy machinery requiring up to 100 points of lubrication. Two types of systems (manual and automatic) are available to meet virtually any industrial application.
1) Manual systems are ideally suited for machinery which can be lubricated by a hand actuated, intermittently fed oil discharge system on an occasional basis.
2) Automatic systems are ideally suited for machinery requiring an uninterrupted discharge of oil either regularly timed or continuous. Automatic systems are actuated by a self-contained timing mechanism or by a mechanical drive mechanism connected to the equipment being lubricated.
Single line resistance systems are compact, economical and relatively simple to operate and maintain. The system is ideally suited for machinery or equipment which displays closely configured bearing clusters, or groups.
A precisely controlled discharge of oil is delivered to each point while the machine is in operation. The system provides a clean film of oil between critical bearing surfaces to keep friction and wear to a minimum. Machinery life is extended and production efficiency is maintained.