LE’s Industrial Oils work for countless applications

Lubrication Engineers Independent Representative

Lubrication Engineers large selection of industrial oils are well-suited for a vast array of uses, including long-service-life applications, high- and low-temperature applications, applications with the possibility of incidental food contact, and outdoor applications in marine environments and other areas where environmental concerns require the use of a very low-toxicity lubricant. LE industrial oils are available in a wide range of ISO grades, with viscosities to meet any application requirement.

LE’s enhanced lubricants are made of highly refined or synthetic base oils as well as the following proprietary additives, which LE developed for exclusive use in its lubricants.

  • Monolec® liquid wear-reducing additive creates a single molecular lubricating film on metal surfaces, vastly increasing film strength without affecting clearances.
  • Duolec® dual-acting additive imparts synergistic properties to lubricants, providing both wear-reducing and extreme pressure protection. It increases film strength and is temperature-activated to provide a protective layer.
  • Quinplex® impact-resistant additive contributes to outstanding water resistance, tackiness, and mechanical stability, and helps to form a barrier against corrosion.

Comprehensive industrial oil lineup offers many benefits

LE industrial oils encompass 15 major categories, ranging from gear oils, air compressor oils and hydraulic oils to rock drill oils, turbine oils and low-toxicity oils. Because the kinds of industrial oils LE offers are so diverse, the features and benefits are also diverse. These include anti-foam, anti-wear, high-viscosity, thermal stability and high load-carrying ability, as well as many others. Among the oils in the LE line are varieties that are semi-synthetic or fully synthetic, some that meet NSF H1 requirements for incidental food contact and are certified Kosher Pareve by the Orthodox Union, and some that meet USDA H2 criteria for non-food contact areas of food processing plants.

LE’s industrial oils can prevent rust, adhere to metal, combat acid hydrolysis, loosen corroded and frozen parts, and meet or exceed OEM requirements for various types of machinery. Specially designed industrial oils continually outperform conventional oils in numerous applications. Heat exchange systems, hydraulics, centralized lubrication systems, air compressors and construction equipment all benefit from LE's superior formulations, which contain the right base oils and the right additive packages for each application.

To learn more about LE's many industrial oils and other lubrication reliability products, please contact our consultants at Lubrication Technologies (413) 788-5823.

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

MULTIFUNCTIONAL OILS


6401-6407 Monolec RO Compressor Turbine Oil Product Info (PDF)6401-6407 Monolec RO Compressor Turbine Oil

Monolec® R & O Compressor / Turbine Oil is a versatile, heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, it is ideally suited for use in all types of air compressors and oil circulating systems.

This long-lasting, nonfoaming, turbine-quality oil provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. With its superior resistance to heat, oxidation and moisture, Monolec R & O Compressor / Turbine Oil significantly outperforms ordinary commercial air compressor and turbine oils. It contains Monolec, LE’s exclusive wear-reducing additive, as well as highly effective rust and oxidation inhibitors.

View Product Information & Technical Data


6801-6807 Multilec® Industrial Oil6801-6807 Multilec® Industrial Oil

Multilec® Industrial Oil is a heavy-duty oil designed to prolong equipment life by combating the effects of high temperatures, water, contaminants and heavy loads that accelerate wear. Available in seven different viscosity grades, this multipurpose lubricant is ideally suited for use in all types of air compressors, hydraulics, oil circulating systems, industrial turbines, and R & O industrial and gear applications.

This long-lasting, nonfoaming, turbine-quality oil provides superior resistance to heat, oxidation and moisture. It also provides peace of mind by ensuring that your equipment works when it is needed, whether you run it intermittently or continuously. Multilec Industrial Oil features a balanced blend of premium base oils and robust additive technology, including rust and oxidation inhibitors and Monolec, LE’s exclusive wear-reducing additive. This formulation delivers a powerful combination of performance and versatility that far exceeds that of other lubricants on the market – both synthetic and petroleum.

View Product Information & Technical Data


9032, 9460, 9068, 9100, 9150 Monolec Syn Industrial Oil9032, 9460, 9068, 9100, 9150 Monolec Syn Industrial Oil

Monolec Syn Industrial Oil (9032-9150, 9220-9460) is designed to prolong equipment life by combating the effects of high temperatures, contamination and loads that accelerate wear. It is a versatile synthetic lubricant that meets or exceeds the requirements of gearboxes, air compressors, vacuum pumps, hydraulic systems, and roll mill bearings found in the textile, plastic, rubber and paper industries. It is formulated with high-viscosity 100 percent synthetic base oil and a specially developed additive package for applications running at extreme temperatures. The additive package provides outstanding thermal stability and rust and oxidation resistance as well as wear resistance as pressures and temperatures rise. A foam suppressant completes the package. The base oil and additive formulation works synergistically to reduce wear, extend oil drain intervals, reduce oil consumption, and practically eliminate deposits and sludge formation, all while providing excellent compatibility with seals.

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

PAPER MACHINE OILS


6190-6140 Monolec® Paper Machine Lubricant6190-6140 Monolec® Paper Machine Lubricant

Premium quality paper machine oil made from select paraffinic base oil. Specifically formulated to provide excellent thermal oxidation stability and rust and corrosion protection for long oil life. Excellent detergency prevents carbon deposit build-up and coking to minimize oil system plugging and premature bearing failures. Excellent wear protection provided by additives and Monolec®, LE's exclusive wear-reducing additive.

Typical Applications For use on hot bearings in paper machine circulating systems, where high oxidation stability and detergency are needed to minimize deposits caused by long exposure to steam heat.

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

LOW TOX OILS


2011 Wirelife® Low Tox® Pentrating Lubricant2011 Wirelife® Low Tox® Pentrating Lubricant

Designed for marine environments and other applications where environmental concerns require the use of a very low toxicity wire rope and chain lubricant, LE's Wirelife® Low Tox® Penetrating Lubricant (2011) has excellent load-carrying capability and provides outstanding protection against rust, while having the lowest possible toxic effect on the environment.

Lubrication Engineers operates under an ISO 9001 Certified Quality System.

Typical Applications For wire rope, cable and chain applications with frequent exposure to the environment, particularly those near water.

View Product Information & Technical Data


6412-6414 Low Tox® Turbine Oil6412-6414 Low Tox® Turbine Oil

Provides long-lasting performance, equivalent to conventional turbine oils while providing lower toxicity than biodegradable turbine oils. Its advanced technology formulation – with highly refined mineral oil and specially selected additives – offers low toxicity, but it does not sacrifice lubrication performance or necessitate shortening of lubricant change intervals; there is no worry of premature oxidation or failure of the lubricant as there is with most vegetable oil-based products. Low Tox Turbine Oil meets or exceeds OEM requirements for many generators, turbines and governors; it is especially suited for use in hydroelectric facilities and flood control structures requiring lubricants.

Typical Applications Hydro-turbines, Generators, Governors, Downhole Water Pumps, Forestry and Logging Equipment, Water and Wastewater Treatment Plants, Paper mills, Other applications where low toxicity and minimal environmental impact is desirable.

View Product Information & Technical Data


6603 Low Tox® Hydraulic Oil6603 Low Tox® Hydraulic Oil

Provides superior performance – equivalent to premium hydraulic oils – with long oil life and excellent wear protection, while providing lower toxicity than biodegradable hydraulic oils. Its advanced technology formulation – with highly refined mineral oil and specially selected ashless additives – offers low toxicity, but it does not sacrifice lubrication performance or necessitate shortening of lubricant change intervals; there is no worry of premature oxidation or failure of the lubricant as there is with most vegetable oil-based products.

Typical Applications Hydroelectric facilities, flood control structures, offshore installations, locks on rivers, dredging equipment, forestry and logging equipment, construction equipment, water and wastewater treatment plants, paper mills, mining, other applications where low toxicity and minimal environmental impact is desirable.

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

CHAIN LUBES


2011 Wirelife® Low Tox® Pentrating Lubricant4010 - 4040 H1 Quinplex® White Oil

H1 Quinplex® White Oil (4010-4040) is an NSF H1 registered lubricant designed to use in food processing equipment where incidental contact may occur or where a clean, nonstaining lubricant is required. It contains Quinplex, LE’s proprietary impact-resistant additive, and is superior to competitive products in oxidation and wear resistance. It reliably extends asset life and decreases the likelihood of expensive unplanned downtime – crucial with high-capital, continuous process equipment.

Typical Applications Bearings, bushings, slides, guides, chains, compressors, valves, vacuum pumps, and hydraulic systems used in food processing equipment and other applications requiring a food grade or nonstaining lubricant.

View Product Information & Technical Data


6412-6414 Low Tox® Turbine Oil9963 Synolec® Lubricant

Chains and conveyors which operate in high temperature environments are extremely difficult to lubricate effectively. Even the very finest petroleum oils oxidize very rapidly as temperatures climb, leaving behind deposits which are detrimental to smooth, efficient chain and conveyor operation.

To meet this severe test of lubricant technology, LE developed 9963 SYNOLEC® Lubricant. As the name implies, this special product is pure synthetic. It leaves no deposits to cause chains to bind, jump the sprocket or break, or conveyor rollers to slide or bind. Since 9963 SYNOLEC is an oil, it can be applied easily with standard equipment . . . spray, drip applicator, or brush.

Typical Applications Originally designed as a high temperature chain and conveyor lubricant; however, it is also appropriate for sealed-for-life bearings and other high temperature applications.

View Product Information & Technical Data


9965-9966 Monolec High Temperature Oven Chain Lubricant9965-9966 Monolec® High Temperature Oven Chain Lubricant

Monolec® High Temperature Oven Chain Lubricant (9965) is a specially formulated lubricant recommended for use on high-temperature oven chains, providing wear protection and lowering power consumption. It is a USDA H2 lubricant made of a synergistic blend of synthetic base fluids and high-performance additives, including Monolec, LE’s exclusive wear-reducing additive. The synthetic base fluids provide excellent thermal stability and low volatility characteristics at high temperatures, while the additives help the lubricant prevent friction, wear and corrosion.

Typical Applications Automatic Lubrication Systems for Baking Ovens, High-temperature Oven Chains such as those used in Bakery Ovens and Kilns, Kiln Chain Drives, Skate Chains in Bread and Bun Baking, Stenter and Tenter Chains

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

ROCK DRILL OIL


2011 Wirelife® Low Tox® Pentrating Lubricant6303 Monolec® Rock Drill Lubricant

Among the most severe demands on lubricants are those related to operation of air-activated percussion tools such as rock drills and jack hammers. These demands include pounding, constant pressure and moist air. Unlike ordinary oils used for air-powered tool lubrication, which require frequent replenishment, Monolec® Rock Drill Lubricant possesses superior performance features and qualities designed specifically for more effective and prolonged service in these extreme service conditions.

Typical Applications Rock drills, Jackhammers, Other air-powered tools.

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

WAY LUBES


6312, 6315 Monolec® Way Lubricant6312, 6315 Monolec® Way Lubricant

High-quality, long-lasting lubricant for machine ways and other sliding surfaces, featuring excellent lubricity and good adhesive properties. Contains Monolec®, LE’s exclusive wear-reducing additive. USDA H2 rated and approved for use in applications requiring the Cincinnati Machine P50 specification.

Typical Applications Machine tool ways and other sliding surfaces. Excellent for centralized lubrication systems.

View Product Information & Technical Data


6312, 6315 Monolec® Way Lubricant1302 Duolec® Industrial Lubricant

Duolec Industrial Gear Oil (1601-1610, 1302, 1304) is a high-performance industrial gear oil with ISO grades ranging from ISO VG 46 to 1500. Designed for use in any industrial gear or bearing application that requires a thermally stable, extreme pressure/antiscuff lubricant, it maintains performance even after filtration.

Duolec Industrial Gear Oil contains Duolec, LE’s dual acting additive that provides both wear-reducing and EP protection, and is fortified with a shear stable tackifier to provide adhesion to metal during use.

Typical Applications Enclosed Gearboxes, Bowl Mills/Pulverizers, Homogenizers, Planetary Gears, Oil Lubricated Bearnings

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

TRANSFORMER OIL


2011 Wirelife® Low Tox® Pentrating Lubricant6760 Transformer Oil

LE’s Transformer Oil (6760) is a highly oxidation-resistant oil for all types of electrical service. Designed for use as an insulating and cooling medium for electrical apparatus, it has excellent heat transfer properties for cooler operation and longer life.

Typical Applications All types of oil-filled electrical devices; Transformers, Oil-filled Switches, Circuit Breakers, Capacitors, Submersible Pumps with Oil-filled Electric Motors.

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

HEAT TRANSFER OIL


6734 Thermic™ Heat Transfer Oil6734 & 6739 Thermic™ Heat Transfer Oil

LE’s Thermic™ Heat Transfer products provide efficient heat transfer and good pump circulation and are perfect for use in asphalt production equipment; die casting machinery; and plastic, paper and rubber manufacturing operations.

Thermic Heat Transfer Oil (6734) has been designed for high-temperature enclosed heat transfer equipment and is formulated with highly refined, severely hydrogenated, paraffinic white oil that resists cracking, oxidation and thickening. It was designed specifically for performance in hot oil exchange systems sustaining operating temperatures up to 316°C (600°F). Thermic Heat Transfer Oil does not rely on extra additives that can be depleted to combat oxidation; instead, it is engineered to rely on the inherent strength of its chemical bond to provide long-term oxidative stability.

Most heat transfer systems need to be flushed of carbon and sludge from exhausted heat transfer fluids. Thermic Heat Transfer System Cleaner (6739) is a one-step, nonhazardous cleaning agent for systems with fouling and other degradation issues. Add 15 percent of the system volume and run for up to two weeks at 288°C (550°F) for removing carbon and sludge.

Typical Application Asphalt Production Equipment, Die Casting Machinery, Plastic, Paper and Rubber Manufacturing Operations.

View Product Information & Technical Data

Multifunctional Oils | Paper Machine Oils | Low Tox Oils | Chain Lubes | Rock Drill Oil | Way Lubes | Transformer Oil | Heat Transfer Oil | Spindle Oil | Hydraulic Oils

SPINDLE OIL


6330 Monolec® Spindile Oil6330 Monolec® Spindle Oil

Monolec® Spindle Oil is a high-quality oil designed for use in high-speed, precision machine tool spindle bearings. It is formulated using low-viscosity, highly refined mineral oil and offers rust and corrosion protection, oxidation stability and water-separating characteristics. It contains Monolec, LE’s proprietary wear-reducing additive that provides additional protection from friction, heat and wear.

View Product Information & Technical Data

WORK WITH US

We'll do everything we can to insure you get the best solution for your application!

TOP